Your Local Chimney Experts in Studio City
Estateguard Chimney Care handles the full scope of chimney and fireplace work.
Certified technicians, written reports, and repairs completed to NFPA 211 standards on every visit.
Chimney Sweep
One visit covers the sweep and a condition check, logged for your file. Same-day scheduling in Studio City and San Fernando & Conejo Valley.
Chimney Inspection
A full inspection walk-through of every component in Studio City, documented the same day, with a sweep added to the visit on request.
Chimney Repair
Crown repair, tuckpointing, and liner work in Studio City. Licensed, insured, materials matched to what is already there.
Fireplace Inspection
A fireplace inspection built to catch refractory cracks, a sticking damper, or smoke shelf wear in Studio City.
Fireplace Repair
Fireplace repair scoped from your inspection findings in Studio City. Licensed and insured, matched materials.
Chimney Level 2 Inspection
The Level 2 camera scan required for a home sale in Studio City, with a same-day report ready for the file. CSIA-certified.
Chimney Cap Installation
Chimney cap installation and replacement in Studio City, sized to your flue. Stainless steel, spark arrestor, animal exclusion.
Chimney Flashing Repair
Flashing repair and replacement at the roofline in Studio City, closing off the spot where roof leaks start at the chimney.
Chimney Masonry Repair
Tuckpointing, brick replacement, and mortar restoration in Studio City. Color-matched work, done by licensed masons.
Chimney Rebuilds
Partial and full chimney rebuilds in Studio City, permitted and documented. Earthquake damage, structural failure, code upgrades.
Fireplace Cleaning
Fireplace cleaning for wood-burning, gas, and electric units in Studio City.
Gas Fireplace Cleaning
Gas fireplace cleaning and maintenance in Studio City, covering pilot, thermocouple, burner, and log service.
Gas Fireplace Repair
Gas fireplace repair in Studio City, with a clear diagnosis of the pilot light, thermocouple, gas valve, or ignition system.
Fireplace Remodel
Fireplace remodels and surround upgrades in Studio City, planned around your home. Stone, tile, mantels, and insert conversions.
Fireplace Inserts
Fireplace insert installation in Studio City for existing masonry fireboxes. Gas, wood, and electric options.
Pellet Stove Repair
Pellet stove repair in Studio City, with the auger, igniter, blower, and control board all checked and diagnosed.
Wood Stove Repair
Wood stove repair in Studio City, covering the baffle, firebrick, gasket, and catalytic combustor.
Gas Logs
Gas log installation in Studio City for existing masonry fireboxes. Vented and ventless sets.
How We Work
Ventura County chimney service with same-day availability and written reports.
Calm, premium service for homeowners who want clear answers.
Estateguard Chimney Care has been serving Studio City homeowners with professional chimney and fireplace services. Our team of certified technicians is dedicated to keeping your home safe and your fireplace functioning efficiently.
We walk homeowners through the condition of the flue, firebox, cap, crown, and visible masonry so the next step is easy to understand.
We keep things focused on home safety, clean job sites, and repair advice that matches how you actually use your fireplace.
Certified and insured
Phone-first scheduling
Trusted local reputation
Clear inspection notes
What Clients Want
A fireplace team that explains the condition, handles the work cleanly, and keeps scheduling simple.
That standard guides every sweep, inspection, repair visit, and phone callback.
Wildfire-Ready Chimney Systems
Homes along the Mulholland Drive corridor and Coldwater Canyon sit in designated fire severity zones. We inspect and fit spark arrestors, clear creosote to first-degree levels, and verify flue integrity so your chimney never becomes an ignition point during Santa Ana wind events.
Built for Estate-Scale Work
Studio City's hillside estates often have multiple fireplaces, oversized flues, and custom masonry dating to the 1940s and 50s. Our CSIA-certified technicians scope every flue with camera inspection, because a single hairline crack in a three-story chimney chase is a liability you can't spot from the rooftop.
Honest Inspection Reports
We document every finding with timestamped photos and video, then walk you through what needs repair and what doesn't. If your chimney only needs a basic sweep, we'll say so. Our Level 2 inspection reports are accepted by every major escrow company in the San Fernando Valley.
Your Neighbors Know Us
We service homes from the Coldwater Canyon hillsides down to the flats near Ventura Boulevard, and out toward the Hidden Hills border. Studio City's tight-knit community of homeowners refers us because we show up on time, protect the property during every job, and answer the phone when you call back two years later with a question.
From first call to clean chimney
A straightforward process with no surprises. Here is what to expect when you book with us.
Schedule Around Fire Season
You pick a time that works, and we flag whether your Studio City property falls within a Very High Fire Hazard Severity Zone along the Santa Monica Mountains corridor. That determines the scope of what we inspect before we arrive.
Pre-Visit Estate Assessment
We send you our CSIA credentials along with a request for photos of each fireplace, flue termination, and any exterior chimney faces visible from ground level. For multi-fireplace estate homes common in the hills above Ventura Boulevard, this lets us plan equipment and time accurately.
Wildfire-Focused Inspection and Sweep
On-site, we run a full NFPA 211 inspection that includes checking spark arrestor mesh integrity, creosote grade in every flue, and ember-entry points where the chimney meets the roofline. Studio City homes backing up to Fryman Canyon or Wilacre Park get extra attention on cap condition and clearance-to-combustibles, because wind-driven embers travel.
Photo Report with Risk Ratings
Within 48 hours you receive a digital report with timestamped photos of every deficiency, rated by fire risk priority. We document creosote grade, mortar joint condition, and flashing gaps so you can see exactly what needs attention and why it matters for a property in a wildfire-adjacent neighborhood.
Seasonal Follow-Up Before Burn Season
We contact you each fall before South Coast AQMD no-burn days begin with a reminder and any outstanding repair recommendations from your last report. If you had 2nd or 3rd degree creosote or a damaged spark arrestor, we prioritize getting that resolved before Santa Ana wind season hits the Cahuenga Pass.
Available 7 AM to 7 PM daily. Same-day service available.
Local chimney care for every neighborhood we serve
We work across 12 communities in San Fernando & Conejo Valley. Search below or browse the full list to find your area.
Studio City
canyon adjacent stretch of the San Fernando Valley
Fire season readiness starts with knowing what is behind the fireplace, and in Studio City that often means a masonry chimney built sometime in the 1940s through 1960s, whether the address sits on a canyon lot or down on flatter ground. Confirming that structure is sound before conditions turn dry is the whole point of an early season check.
Altadena
Altadena and the San Gabriel Mountain foothills above Pasadena
Altadena is an unincorporated foothill community with a deep stock of early 1900s Craftsman and masonry homes, many with original brick chimneys. After the January 2025 Eaton Fire, chimney inspection, structural assessment, and rebuild support are central concerns for homeowners across the area.
Brentwood
Brentwood and the Westside hillside neighborhoods
Brentwood homes often have multiple fireplaces and complex masonry systems that require experienced technicians familiar with high-end residential work. Many properties have outdoor fire features in addition to interior fireplaces.
Burbank
eastern edge of the San Fernando Valley
Fire-season readiness in Burbank starts with matching each factory-built fireplace, common across housing built from the 1940s through the 1960s, to replacement parts and venting sized for its original design. Getting that match right is what keeps a system sealed against sparks instead of just running.
More areas
8 more areas in our directory
Why it matters locally
Coastal corrosion, foothill wildfire, valley heat - all handled differently
Where you live changes what your chimney needs. Salt air, seismic age, Santa Ana winds - we plan each job around what your neighborhood actually faces.
Historic masonry
Older Craftsman and bungalow neighborhoods across the region have original brick chimneys that need mortar, crown, and seismic review - not just a sweep.
Foothill fire prep
Homes near canyon and foothill areas need tighter spark arrestors and annual cap inspections. We know which neighborhoods carry the most ember risk.
Coastal hardware
Salt air chews through standard chimney caps and dampers fast. Stainless steel and copper components are the practical choice for anything near the coast.
What homeowners ask before booking
Straightforward answers to the most common chimney and fireplace questions. Still unsure? Call us at (747) 216-0498.
Get a free chimney estimate in Studio City
CSIA-certified technicians. Same-day scheduling. Written estimates. Call now or fill in the form and we will call you back.
(747) 216-0498Available 7 AM to 7 PM daily including weekends
Request a callback
We will call you back shortly.